Page 1 of 1

Installing plugs into hose

PostPosted: Sat Oct 10, 2015 8:33 am
by Marcb
I received my hose and plugs and other parts to make my limb form But didn't get any instructions for installing the plugs. They're from Bingham'. Looks like one clamp on the very end does the second go around the hour glass shape or the bottom?

Re: Installing plugs into hose

PostPosted: Sat Oct 10, 2015 12:55 pm
by Robertfishes
I put the plug into the hose leaving an 1/2" hose past end of plug.. I always put one in the center of hourglass..in the thinnist part and the other one towards the outer edge where its milled round with grooves

Re: Installing plugs into hose

PostPosted: Sat Oct 10, 2015 5:32 pm
by Marcb
Robertfishes wrote:I put the plug into the hose leaving an 1/2" hose past end of plug.. I always put one in the center of hourglass..in the thinnist part and the other one towards the outer edge where its milled round with grooves



Thanks IIappreciate it. Figured it was best to ask and be safe than our a plug through the wall